-
Suspension Set For Conductor
★ Single Suspension Clamp
★ Double Suspension Clamp
★ The fulcrum of suspension dispersed the stress to the preformed rods, minimizing the static stress and dynamic stress of the conductor. Avoid the damage of the conductor.
★ Dispersed the stress on suspension fulcrum, enhanced the fatigue resistance of the conductor, prolong the service life.
★ The design of preformed rods provied credible grip strength, enduring the inbalance load, so as to avoid the slip of conductor.
★ Special structure design debased the loss of electromagnetism and eliminated the discharge of corona, saving more energy than the traditional suspension sets.
★ The design enhanced the rigidity of the fulcrum on conductor, and augment the curvature radius. The single fulcrum can turn a angel with 300 . and the double suspension fulcrum can turn a angel with 600 . -
Single Suspension Set for ADSS
1.Reduce static stress at the support point of ADSS cable
2.Ensure the cable is cushioned
3.Used for high-voltage transmission lines
4.Minimizes wear and tear
5.Reduces the load on the tower and support -
Double Suspension Set of OPGW
1.For supporting straight pole and tower
2.Provide protection for optical ground wire
3.Play a supporting role in damping
4.Avoid stress concentration
5.Connect the OPGW Cable and pole -
Tension Set of OPGW/ADSS Cable Installation, Helical Tension Set for ADSS or OPGW
1.Used for the corner towers, the middle of follow-tower
2.The largest installation file from the less than 100 meters
3.Support ADSS cables over short distances
4.Maintaining the integrity and performance5.Relief tension caused by wind
-
Short Span Suspension Set and Single Layer Suspension Set
1.Reduce static stress at the support point of ADSS cable
2.Ensure the cable is cushioned
3.Used for high-voltage transmission lines
4.Minimizes wear and tear
5.Reduces the load on the tower and support
-
Immobility Clamp/Pole Fasten Clamp
1. For connecting the tower/pole
2. Provide suspension point for ADSS cable
3. Immobility Clamp for tower uses metal clamp
4. Immobility Clamp for Pole uses hoop
-
Cable Storage Rack Bracket Preformed Power Outer Coil Accessories Fittings for Optical Fiber Cable
1. For connecting tower or pole
2. Place on the running rod or tower
3. For transmission and distribution
4. Use with the connector box
-
Vibration Damper/ Armour Rod
1. For controlling aeolian vibration
2. dispel the impact energy on the cable caused by the breeze .
3. High tensile galvanized steel
4.Reduce cable vibration horizontal
-
Overhead fiber optic cable fittings down lead clamp for tower/pole
- Design for lead down cables
- Fix the arch section on pole/tower
- Each tension tower is supplied with 2 sets
- Each tension pole is supplied with 1 set
- Metal type is for OPGW installation
- Call Support +86 189 2541 8659
- Email Support sales01@henvcon.com
