Top Suppliers Cable Fittings Galvanized Iron Cross Arm On Pole - Preformed Tension Dead-end For Conductor – Henvcon

Usage and characteristics

Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line.
The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlace the conductor naturely and would produce a great holding strength. The novel structure and exact design all contribute to the reliability of the conductor tension set. The set is usually made of concentric-lay-stranded Aluminium-clad steel conductors ,galvanized iron wire strands and other materials.
Diagrammatic Drawing of Installation for Tension Dead-end.

Product Parameters

Preformed Conductor Tension Dead-end for ACSR/ Aluminum Stranded Conductor / Insulated Conductor
Preformed Ground Wire Tension Dead-end for Galvanized Iron Wire Strands/
Concentric-Lay-Stranded Aluminum-Clad Steel Conductor.
Preformed guys Tension Dead-end for Galvanized Iron Wire Strands

Note :
1)Due to the special construction of the clamp，the clamp only can be used once after enduring the stress.
2)When purchase products or place order, the specification and type of conductor should be provided.
3)Joint is not allowed on the clamp, but allowed on the conductor beside the clamp.
4)The Direction of outer layer should be the same, the standard of clamp is right hand lay. If need the left lay, please declare.

Packing /shipping/ Terms of Payment

Packaging: preformed guy grip according to the concrete product， Usually packed with cartons, wooden cases(as customer’s requirements)
Delivery: usually, it will take about two weeks for the order of 10000 sets for production
Terms of Payment : By T/T