Guangdong Henvcon Electric Power Technology CO., LTD.

Featured

  • Low price for Stock Bridge Vibration Dampers For Adss - Copper Clad Steel Preformed Armor Rod – Henvcon

    Low price for Stock Bridge Vibration Dampers For Adss - Copper Clad Steel Preformed Armor Rod – Henvcon

    Usage and characteristics The main function of the armor rods is to protect conductors/strands against bending, compression, abrasion and arcover damage and to provide restorative repair. ERY IMPORTANT: The lay direction of the fittings must be identical to the outer layer of the specified conductor. The rods of the fitting are refaced in the ends to avoid damages in the assembly and to the specified conductor. Refacing of the ends is made by abrasion in the rods up to 4,62 mm. When the rods ...
  • Good Wholesale Vendors Pvc Single Top Tie - PVC Plastic insulator tie – Henvcon

    Good Wholesale Vendors Pvc Single Top Tie - PVC Plastic insulator tie – Henvcon

    Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...
  • Manufacturer for Uv Resistance Pvc Plastic Preformed Side Ties For Adss Cable - Preformed Tension Dead-end For Conductor – Henvcon

    Manufacturer for Uv Resistance Pvc Plastic Preformed Side Ties For Adss Cable - Preformed Tension Dead-end For Conductor – Henvcon

    Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac...
  • High Quality Anchor Rod For Adss - Spiral Vibration Damper For Helical Accessories – Henvcon

    High Quality Anchor Rod For Adss - Spiral Vibration Damper For Helical Accessories – Henvcon

    Usage and characteristics Spiral Vibration Damper is made of engineering plastic which is high strength,aging resistance and high elastic;it will not cause any mechanical damage to the optical fiber caber. Spiral Vibration Damper is widely used in ADSS cable installation.Each Spiral Vibration Damper is composed of a short part of grip section and a long vibration attenuation section.the grip section can affective close upon the cable to make sure the spiral vibration damper is firmly fixed on...
  • Factory Price Anchoring Pole Clamp - Preformed Tension Dead-end For Conductor – Henvcon

    Factory Price Anchoring Pole Clamp - Preformed Tension Dead-end For Conductor – Henvcon

    Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac...
  • New Fashion Design for Single Side Tie - Copper Clad Steel Preformed Armor Rod – Henvcon

    New Fashion Design for Single Side Tie - Copper Clad Steel Preformed Armor Rod – Henvcon

    Usage and characteristics The main function of the armor rods is to protect conductors/strands against bending, compression, abrasion and arcover damage and to provide restorative repair. ERY IMPORTANT: The lay direction of the fittings must be identical to the outer layer of the specified conductor. The rods of the fitting are refaced in the ends to avoid damages in the assembly and to the specified conductor. Refacing of the ends is made by abrasion in the rods up to 4,62 mm. When the rods ...
  • Lowest Price for Single Top Preformed Tie - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon

    Lowest Price for Single Top Preformed Tie - OPGW Extra Strength Double Performed Tension Set Two Way Dead End Clamp Guy Grip Fiber Optic Accessories for OPGW – Henvcon

    Usage and characteristics OPGW Extra-Strength Double Helical Tension Set is special designed for cable installation on large span,high fall and big corner over head line,where the cable RTS is larger than 160KN. It is composed of three layers construction,including inner reinforcing rods,structural reinforcing rods and outer layer Dead-ends.This structure improves the tensile strength of Helical Tension set,without restriction such as line turn-angle.A complete set of OPGW Extra-Strength Doub...
  • Super Purchasing for Stainess Steel Bolt Connection Pipe Fittings Fastener Set Adjustable Tube Clamps - Preformed Tension Dead-end For Conductor – Henvcon

    Super Purchasing for Stainess Steel Bolt Connection Pipe Fittings Fastener Set Adjustable Tube Clamps - Preformed Tension Dead-end For Conductor – Henvcon

    Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac...
  • Factory made hot-sale Pole Clamp For Concrete Pole For Opgw Cable - PVC Plastic insulator tie – Henvcon

    Factory made hot-sale Pole Clamp For Concrete Pole For Opgw Cable - PVC Plastic insulator tie – Henvcon

    Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...
  • Wholesale Price Joint Box Cap-Type Metal Opgw For Tower - PVC Plastic insulator tie – Henvcon

    Wholesale Price Joint Box Cap-Type Metal Opgw For Tower - PVC Plastic insulator tie – Henvcon

    Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...
  • Factory For Cable Tension Clamp Pa1500 - Preformed Tension Dead-end For Conductor – Henvcon

    Factory For Cable Tension Clamp Pa1500 - Preformed Tension Dead-end For Conductor – Henvcon

    Usage and characteristics Preformed Tension Dead-end is used in the installation of the exposed conductor used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Dead-end which now is being widely in the line. The structure of the Preformed Tension Dead-end is simple , and the pipe structure formed by the two legs of the preformed line would enlac...
  • Big Discount Aluminium Wire Tension Strain Dead End Clamp For Adss - PVC Plastic insulator tie – Henvcon

    Big Discount Aluminium Wire Tension Strain Dead End Clamp For Adss - PVC Plastic insulator tie – Henvcon

    Usage and characteristics PVC plastic single line/top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators.Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: PVC plastic single line/top ties are made from white PVC.This material has the advantages:UV resistance,tensile strength,impact strength, flexural strength and self-extinguishing properties. Packing /shipp...